| Customization: | Available |
|---|---|
| Classification: | Imaging Diagnostic Equipment |
| Type: | MRI Scan |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Guangzhou Maya Medical Equipment CO.,LTD
1.More than 10 years experience
2.One-stop service
3.Overseas showroom(Nigeria & Madagascar)
4.Main Products: CT/MRI/X-ray machine,Ultrasound Machine,Laboratory Equipment,Dental Equipment,Gynecology Equipment,Hospital Furniture and so on.
| Professional MRI Scan 1.5T magnetic resonance system MRI Tomography Scanning Machine |
*Excellent price performance ratio
Comprehensive application suite and powerful software included in standard configuration
*Patient friendly appearance
Most open C-shaped magnet
*Minimal sitting requirements
Less than 50 m² (538 sq.ft);
*Low operating Costs
Permanent magnet - no helium
*Higher revenues
Attractive to more patients and referring physicians
*Excellent Return On-Investment
Decreased costs-optimized profitability
*Efficient and Professional service team
24 hours service on-line
Specifications of MY-D054(0.35T) System
UUUUUUUUU1.0 Magnet:
Operating Field Strength 0.35 Tesla(3500 Gauss)
Magnet Type Full open C-shaped, 2-colum
Magnetic material Permanent Nd-Fe-B magnet
Homogeneity (400mm DSV) ≤ 2.0ppm (Vrms)
(200mm DSV) ≤ ±1ppm (FWHH)
Shimming Passive & active shimming
Patient gap 400mm(from cover to cover)
Net Weight 17,500KGS
Dimension 1970mm*1320mm*1820mm
UUUUUUUUU2.0 Gradient System:
Gradient strengh max. 25mT/m (Gx/Gy/Gz)
Slew rate 64mT/M/ms (Gx/Gy/Gz)
UUUUUUUUU3.0 RF System:
Spectrometer Digital (4 channels)
Transmitting coil Flat planar coil
Receiving coils Phase array coil (Neck coil, Head coil, Large body coil, Small body coil, Knee coil,)
Optional coils Wrist coil, Shoulder coil spine coil, breast coil, ankle coil, etc.
Power of transmitter amplifier 6KW
UUUUUUUUU4.0 Computer System:
Operating system Windows2000/NT/XP
CPU 2.8GHz(Dual Core Processor)
Hard disk ≥250GB
RAM 2048MB (2GB)
Display Device ≥22'' TFT
Network & laser printer interface DICOM3.0
Software BASDA BTI-035 Software
5.0 Auto Pre- scan
6.0 Pulse Sequence:
Standard IR
Spin Echo ( SE 2D/3D)
Multi-slice multi-echo (MSME)
Gradient Echo (GRE 2D/3D)
Steady state process gradient echo( SSPGRE)
Fast spin echo (FSE)
Single shot fast spin echo(SSFSE)
Multi shot fast spin echo (MSFSE)
Inversion recovery (IR)
Inversion recovery fast spin echo (IRFSE)
Short time inversion recovery (STIR)
Fluid attenuated inversion recovery ( FLAIR)
MRM ,MRU ,MRCP
TOF 2D/3D MRA
Diffusion weighted imaging (DWI)
Echo planar imaging(EPI)
7.0 Image:
Acquisition matrix 64/128/256/512
Resolution 1mm(head 24cm FOV 256X256)
1.5MM(body 30cm FOV 256X256)
0.5mm(head 24cm FOV 512X512)
0.75mm( body 30cm FOV 512X512)
Maximum display matrix 1024x1024
FOV 20 ~ 400mm
Slice Orientation Sagittal, coronal, transversal, any angle any oblique
Image Type T1 Weighted imaging , T2 weighted imaging ,T2* weighted imaging , proton density imaging;Water Suppressed Imange,Fat Suppressed Image, MRM, MRU,MRCP; Magnetic Resonance angiography (MRA), Diffusion Weighted Imaging (DWI)
8.0 Patient Table:
Max. Patient load about 240kg;
Available with laser light localizer for patient positioning
Longitudinal travel range: ≥1650mm
Intercommunication between patient and operator: available
9.0 Power Supply
3N~380/400V 50/60Hz 10KVA
10.0 Typical Layout:
Magnet Room About 30 Square meters(5m×6m);
Equipment Room About 9 Square meters(3m×3m);
Control Room About 9 Square meters(3m×3m);
Total MRI-System area About 48 Square meters.
){kind=link}